SOLM8 S70 cricket bowling shoes with the adjustable strap closed and rubber cleats visible

Cricket Bowling Shoes: What Club Bowlers Should Look For

Quick answer: Cricket bowling shoes need three things: grip at the crease, a stable heel and enough cushioning for the front foot landing. Most club and amateur bowlers in the US do well in rubber cleats, because they grip on artificial pitches and hard ground. Full metal spike shoes are mainly for fast bowlers playing on grass at a high level.

Every ball a bowler sends down ends with a hard landing on one foot, and a club bowler can deliver several overs in a spell. That is why cricket bowling shoes deserve more thought than a general pair, and why cricket shoes for bowlers are built around grip, heel support and cushioning. This guide covers what a bowler needs from the sole, the heel and the insole, how that changes for pace and spin, and which SOLM8 model suits which kind of bowler.

What makes cricket bowling shoes different

A bowling action loads the feet in three moments. The back foot lands and turns at the crease. The front foot then lands with the whole body moving over it, which is the hardest impact in the action. Finally the bowler runs through, away from the pitch.

Diagram of a bowling delivery stride showing back foot contact, front foot landing and follow through

Each moment asks something different of the shoe:

  • Back foot contact: grip so the foot does not slide as the body turns.
  • Front foot landing: heel support and cushioning to absorb the impact.
  • Follow through: grip to slow down safely and steer away from the pitch.

The follow through matters for another reason. Under Law 41.13 of the MCC Laws of Cricket, it is unfair for a bowler to enter the protected area of the pitch in their follow through without reasonable cause. Shoes that grip well make it easier to stop and veer off on time.

Rubber cleats or metal spikes for bowling

This is the biggest choice in cricket bowling shoes, and the right answer depends on where you play.

Sole of the SOLM8 S70 with rubber cleats next to the sole of the S60 Pro with metal spikes
Rubber cleats Metal spikes
Best surfaces Artificial pitches, hard and dry ground, mats Soft grass pitches and wet outfields
Who wears them Club, league and amateur bowlers Mainly professional and high level fast bowlers
Comfort on hard ground Better Pressure points under the spikes
Can you replace them No, molded into the sole Yes, screw in spikes

Many US club matches are played on artificial pitches and summer outfields that dry out hard, which is where rubber cleats suit bowlers best. We cover this in more detail in our guide to cricket shoes with rubber spikes.

Heel support and heel drop for bowlers

The front foot landing is the hardest moment in the action, so look for a firm heel counter that does not fold when you squeeze it. Heel drop, the height difference between the heel and the forefoot, also affects how the landing feels. The SOLM8 S4, S8 3.0 and S70 all have a 10mm heel drop.

How securely the shoe holds your foot matters as much as heel height. Lace firmly for bowling. The S70 adds an adjustable secure strap.

Cushioning and insoles for long spells

Club bowlers often bowl long spells on hard ground, which is where the insole earns its keep. If you bowl through a full summer league, put cushioning high on your list. The S8 3.0 and S70 both use gel insoles; the S4 uses an EVA molded insole.

Fast bowling shoes vs shoes for spinners

Fast bowling shoes and shoes for spinners do not need to be the same.

  • Fast and medium fast bowlers land harder and need the most heel support, cushioning and grip. A strap and a gel insole are worth having.
  • Spinners take a shorter run up and land more lightly, but still pivot hard on the front foot. Grip and a lighter shoe matter more than heavy cushioning.
  • All rounders need one pair that bowls and bats. A lighter rubber cleat shoe usually covers both.

How a bowling shoe should fit

Bowlers should leave a little room at the toe, because the foot slides forward on landing. Too much room lets the foot move and causes blisters; too little bruises the toes. Try shoes on with the socks you play in, lace them firmly and walk on a hard floor before you decide. Our men's cricket shoes guide covers fit and sizing in more detail.

SOLM8 cricket bowling shoes by bowling style

SOLM8 S70, S8 3.0, S4 and S60 Pro cricket shoes labeled by the bowling style each suits
Bowling style SOLM8 model Why
Club pace bowler S70 Dura Cleats with a Flexibility Zone, gel insole, adjustable secure strap
Long spells on hard ground S8 3.0 Rubber cleats with a gel insole
Spin, medium pace and all rounders S4 Lightest of the SOLM8 rubber cleat range
Fast bowling on grass S60 Pro Screw in metal spikes set among rubber studs

For club pace bowlers: S70

The S70 cricket shoes are the SOLM8 pick for club pace bowlers. They use Dura Cleats with a Flexibility Zone, a gel insole and an adjustable secure strap, weigh 430g per shoe and come in US 8 to 12.5.

For long spells: S8 3.0

The S8 3.0 cricket shoes combine rubber cleats with a gel insole at 420g per shoe, in US 8 to 12.5.

For spinners and all rounders: S4

The S4 cricket shoes are the lightest in the SOLM8 rubber cleat range, with DiamondPro Cleats and an EVA molded insole, in US 8 to 12.

For fast bowlers on grass: S60 Pro

The S60 Pro uses screw in metal spikes set among rubber studs. It is the SOLM8 choice for fast bowlers who play on grass pitches where metal spikes grip best.

FAQ

What shoes are best for cricket bowling?

The best shoes for cricket bowling, for most club and amateur bowlers in the US, are rubber cleat cricket bowling shoes with a firm heel, a cushioned insole and good grip at the crease. Full metal spike shoes are mainly for fast bowlers playing on grass at a high level.

Do fast bowlers need metal spikes?

Not always. Metal spikes grip best on soft grass pitches, which is why professional fast bowlers often wear them. On artificial pitches and hard, dry ground, rubber cleats are more comfortable and grip well.

Are cricket bowling boots different from batting shoes?

Bowling boots usually put more weight on heel support, cushioning and grip for the front foot landing. Batting shoes can be lighter, since batters mostly run between the wickets. An all rounder can use one pair that does both.

What heel drop do SOLM8 rubber cleat bowling shoes have?

The SOLM8 S4, S8 3.0 and S70, the three rubber cleat models, all have a 10mm heel drop.

SOLM8 Cricket Shoes

Find your bowling pair

See every model in the 2026 cricket shoes collection, with free standard shipping on US orders over $50. Joining the SOLM8 email list gets you 10% off your first order.

About the author

SOLM8 logo

SOLM8 Team

SOLM8 is a US based cricket footwear brand co founded by Bhupinder Singh Kharbanda (BSK), who has designed cricket shoes for more than 25 years. The SOLM8 Team writes practical guides for cricket players and fans in the US, drawing on that design experience and on what club players tell us about their shoes.